The FX enabled NX Room Controller (NXRCFX) provides automatic and manual lighting control with the simplicity of plug-in installation and auto-configuration.

NXC-WA200 Series

NXFRD 0-10V Dimming Converter allows for a 0-10V interface to be used to control Reverse and Forward Phase Dimming circuits in conjunction with a NXRCFX Room Controller.

The NXRCFX-UL924 Load Controller is specifically designed to control the emergency lighting in a single zone or room that is using room controllers as the primary lighting control.

NXC-WHS20 Integrated Sensor

NXC-WIZ20 Integrated Sensor

NXC-WOS3-PC Series

The NXDS Daylight Sensor provides the necessary daylight-level information to the NX network.

NXSMDT Digital Smart Occupancy Sensor, Wall Switch, PIR/US

NX Digital DT OMNI Sensor (NXSMDT) contains leading occupancy detection, wired and wireless capabilities, and Bluetooth programming all in one device.

NXSMP2-HMO Series Wireless High Mount Indoor and Outdoor In-Fixture Sensor provide occupancy sensing and daylight harvesting in one sensor and can be confugured through the NX Lighting Controls mobile app.

NXSMP2-LMI Series Wireless Low Mount In-Fixture Sensor provide occupancy sensing and daylight harvesting in one sensor and can be confugured through the NX Lighting Controls mobile app.

NXSMP2-LMO Series Wireless Low Mount Indoor and Outdoor In-Fixture Sensor provide occupancy sensing and daylight harvesting in one sensor and can be confugured through the NX Lighting Controls mobile app.

NX Ceiling Mount and Wall Mount Occupancy Sensors employ Passive Infrared and Ultrasonic sensing technologies to turn lighting on and off based on occupancy

NXSMP2-OMNI Series Wireless Indoor and Outdoor In-Fixture Sensor provide occupancy sensing and daylight harvesting in one sensor and can be confugured through the NX Lighting Controls mobile app.

NX Digital Smart Occupancy Sensor, Wall Switch, PIR

NXSMP2-SMI Series Wireless Slide Mount In-Fixture Sensor provide occupancy sensing and daylight harvesting in one sensor and can be confugured through the NX Lighting Controls mobile app.

The NXSW2-GT4 Touchscreen is a versatile interface featuring 16 screens that controls lighting in one or more areas or zones, offering on/off functionality, dimming, color tuning (SpectraSync), and customizable presets.

NX Wireless Digital Smart Wall Switch

NX Wireless Digital Specialty Wall Switch

ZBT-S1AWH Series

NXC-WWD2-4 Series

NXC-WWD2-2 Series

NXSW Wireless Rocker Wall Station (NXSW-WRS) is an attractive, architecturally pleasing decorator style dimmer switch

NX Digital Smart Switch

NX Digital Specialty Key Switch Switch

NX Digital Specialty Wall Switch

The NX Lighting Control Panel (NXP2 Series) is a robust and reliable panel that can operate standalone or as a NX networked device.

The NX Lighting Control Panel Relays (NXP2 Series) are mechanically latching single and double pole relays for use with NX Lighting Control Panels.

CX Commercial Lighting Control Panels System

The CX Dimming Option Card provides 0-10V dimming through any Current Lighting CX Lighting Control Panel.

CX Commercial Lighting Control Panels provide feature rich and cost-effective lighting control for maximum energy savings.

CX Panel Programmable Wall Switches are low voltage controls and feature multiple button configurations and colors making them the perfect switch solution for use with the CX Commercial Lighting Control Panels.

Lighting Control Panel Relay Channel Barrier

Our Technical Support staff can assist on-site personnel with programming direction and best practices.

Lighting Control Panels

The NX Relay Channel Barrier provides a code gauge steel separation between any two relays in the NX lighting control panel.

Current’s LightGRID+ wireless outdoor lighting management platform offers lighting control solutions for virtually any outdoor application including roadway lighting, parking lots, parking decks, office parks, and smart campuses. LightGRID+ Mobile is an easy to use application for installing and configuring the LightGRID+ wireless node modules.

The NX Lighting Controls App provides Bluetooth® wireless setup and configuration of NX System devices and luminaires equipped with an NX In-Fixture module with smart sensor.

Modern User Interface. NX Network Expansion.

NX Area Controller V2 (NXAC2 Series), NX Network, BACnet, 120V

NX PoE Switch/Power Injector (NXPOE7-24B) is a NX network accessory that provides for splitting the network from the NXAC into multiple segments

The NX Media Converter allows a transition from copper based ethernet to fiber.

The NX Network Bridge Module (NXHNB2) provides a wired connection between a stand-alone NX Room Controller lighting control zone and the NX Lighting Controls network.

Certified Open Automated Demand Response 2.0 Virtual End Node (NXOADR2-VEN-DC)

The NX Remote Connect enables higher quality of service and faster resolution of any on-field issues pertaining to the NX Lighting Controls system.

The BTSMP is part of the NX Lighting Controls Bluetooth Sensor family. It seamlessly integrates with all luminaires and provides simple dimming control using the NX Lighting Controls mobile app.

The BTSMP is part of the NX Lighting Controls Bluetooth Sensor family. It seamlessly integrates with all luminaires and provides simple dimming control using the NX Lighting Controls mobile app.

The BTSMP is part of the NX Lighting Controls Bluetooth Sensor family. It seamlessly integrates with all luminaires and provides simple dimming control using the NX Lighting Controls mobile app.

The BTSMP is part of the NX Lighting Controls Bluetooth Sensor family. It seamlessly integrates with all luminaires and provides simple dimming control using the NX Lighting Controls mobile app.

The Bluetooth WASP Occupancy Sensor (WSPD) uses NX Lighting Controls Mobile app for remote programming, features Passive Infrared (PIR) motion sensing technology as well as ON/OFF and 0-10V dimming control with an integral light sensor.

The Duplex Receptacle is capable of controlling other receptacles downstream in the branch circuit. The series is designed to be automatically controlled by a low voltage signal from occupancy sensors.

The DLCPCC photocell controller provides control of lighting circuits based on natural daylight.

The Dimming WASP Indoor/Outdoor Occupancy Sensor (WSPD) is specifically designed to provide 0-10V (Class 1) control of dimmable fixtures.

Line Voltage Auxiliary Relays (RR1SPDTC) provide an isolated N.O. / N.C. contact that can be used to integrate low voltage sensors to other building automation systems.

The Heavy Duty Universal Power Pack+ (UVPPHD+) is a simple to deploy control device that pairs with low voltage 24VDC sensors and switches to provide on/off control of connected loads.

The Universal Voltage Power Pack (UVPPHD) is a self-contained transformer and mechanical latching relay designed for low-voltage 24VDC occupancy sensors.

The LightHAWK® Dimming Dual Technology Wall Switch Sensor combines passive infrared (PIR) and ultrasonic (US) technologies with the additional energy savings of 0-10V dimming.

The LightHAWK Dimming Wall Switch Sensor combines passive infrared (PIR) technology with the additional energy savings of 0-10V dimming.

The LightHAWK Dual Technology Wall Switch Sensor combines ultrasonic (US) and passive infrared (PIR) technologies for unequaled motion detection.

LightHAWK utilizes Passive Infrared (PIR) sensing technology for superior major motion detection and is designed to provide single-circuit ON/OFF control for a broad range of lighting loads.

The LightHAWK2 Night Light Wall Switch Sensor combines passive infrared (PIR) technology with the added safety and comfort of a night light.

The LightHAWK Passive Infrared Wall Switch Sensor uses passive infrared (PIR) technology to detect motion.

The LightHAWK Ultrasonic Wall Switch Sensor uses ultrasonic (US) technology for detecting minor movement in areas with line-of-sight obstacles such as cubicles and stalls.

The LODT combines ultrasonic (US) and passive infrared (PIR) technologies to turn lighting on and off based on occupancy.

The LODIA combines passive infrared (PIR) and acoustic (sound-activated) technologies to turn lighting on and off based on occupancy.

The LOIR sensor uses passive infrared (PIR) technology to turn lighting on and off based on occupancy.

The LightOWL Passive Infrared Outdoor Sensor sensor uses passive infrared (PIR) technology to turn lighting on and off based on occupancy.

Auxiliary relay units (RRU) are used to switch lighting or control circuits. Designed to work with line voltage sensors, it provides 20 amp switching capacity and features a Normally Open (N.O.) isolated contact.

The Luxstat Light Sensor provides the necessary daylight-level information to the Luxstat daylight harvesting control modules.

The OMNIIR line voltage ceiling sensor uses passive infrared (PIR) technology to turn lighting on and off based on occupancy.

The OMNIDTBP1277 line voltage ceiling sensor combines ultrasonic (US) and passive infrared (PIR) technologies to turn lighting bon and off based on occupancy.

The OMNIUSBP1277 line voltage ceiling sensor uses ultrasonic (US) technology to turn lighting on and off based on occupancy.

The OMNIDIA combines passive infrared (PIR) and acoustic (sound-activated) technologies to turn lighting systems on and off based on occupancy.

The OMNIIR uses passive infrared (PIR) technology to turn lighting on and off based on occupancy.

The OMNIDT combines ultrasonic (US) and passive infrared (PIR) technologies to turn lighting on and off based on occupancy.

The OMNIUS uses ultrasonic (US) technology to turn lighting on and off based on occupancy.

The Lux Meter/Photo Sensor provides the necessary daylight-level information to the Fixture Module.

MP power packs provide two electrical functions: the 24 VDC power supply (to operate sensors) and the 20 Amp line-voltage relay (to control the load).

The MPS Auxiliary Pack is a self-contained transformer and relay (an ON/OFF switch controlled by a circuit) designed for low-voltage 24VDC occupancy sensors.

The Universal Voltage Power Pack (UVPP) is a self-contained transformer and relay (an ON/OFF switch controlled by a circuit) designed for low-voltage 24 VDC occupancy sensors.

The WASP High Bay Occupancy Sensor (WSP) is specifically designed for ON/OFF control of high bay fixtures in warehouses, distribution centers and similar facilities.

The LVS1HD heavy duty wall switch is ideal for high abuse applications where standard plastic low voltage wall switch stations are not suitable.

Preset Slide Dimmer with Full Range Dimming & On/Off Control

Rocker Slide Dimmer with Full Range Dimming & On/Off Control

The Low Voltage dimmable switch station will provide manual control and 0-10V dimming for stand-alone applications.

The Low Voltage Heavy Duty Key Switch (LVSKEY) is designed to provide a secure means to manually control lighting in areas where security or access control are a concern.

Our Cat5e/6 enabled Low Voltage Switches are designed for applications where flying leads are not desired in the field.

The UL1008BCELTS1277 is for branch circuit emergency lighting control under UL standards. The UL1008BCELTS1277 automatically transfers from normal to emergency power source upon loss of normal power.

Shunt Relays are typically used to bypass a normal control such as a switch, dimmer, or panel mounted relay when used on an emergency circuit.

The UL924EPC1-UNV is designed for applications that require control of emergency light fixtures along with the general lighting.

The Low Voltage Emergency Remote Test Button is designed to provide the ability to remotely test the emergency circuit in a space.

UL924 Automatic Load Relay allows emergency lighting to be controlled with normal lighting, ensuring that the emergency lighting will be forced to full bright upon loss of normal power.

The LightGRID+ Wireless Internal Fixture Module is a bidirectional wireless RF device that allows an individual fixture to be managed, monitored and metered.

The LightGRID+ External Fixture Module is a bidirectional wireless RF device that allows an individual fixture to be managed, monitored and metered.

The LightGRID+ Photocell provides On/Off lighting control based on detected light.

LightGRID+ Gateway G3 (GW3) is a autonomous controller that combines LightGRID+ Fixture Modules into a single wireless network. The GW3 enables communications between fixture modules and LightGRID+ Enterprise Central Management Server or LightGRID+ Express software app.

LightGRID+ Wireless Outdoor Lighting System

The NXOFM series On-Fixture Module enables a complete control solution for a single luminaire. The On-Fixture Module incorporates a single pole relay for On/Off control as well as industry standard 0 - 10 volt continuous dimming control. The water tight twist lock package contains the control logic, NX Network radio, Bluetooth® radio antennas, and 0 - 10 volt dimming driver.

The NX Audio Visual Interface Module (NXAVM) allows third party systems to digitally interface with an NX distributed lighting control system.

The NXBTI Bluetooth® Interface Module provides a wireless communication bridge for communication via NX Lighitng Controls mobile app and connects to and is powered by an NX SmartPORT™ or FX port.

The NX Contact Closure Interface (NXCI) allows third party devices to provide dry contact inputs to an NX distributed control system.

The NX Dry Contact Interface Module (NXDCIO) provides a simple way to incorporate standard dry contact inputs and outputs into the NX control system.

The NXDCO Dry Contact Output Module allows an NX in-fixture module or NX room controller application to control third party devices through simple dry contact closure or 0-10V dimming output

NXFSP and NXDSP dual SmartPORT™ adapters allow for wired CAT5 interconnection of luminaires equipped with internal NXFM In-fixture modules.

The NXHDI provides the network connection and power to accessory components such as the NXDCIO Dry Contact Interface and NXSP SmartPORT Modules.

NX Network Radio Module with Bluetooth Programming (NXRM2)

The NX Occupancy Output Interface (NXRO) provides a means to communicate the occupancy state of an NX distributed control zone to HVAC or other systems using simple contact closure.

The NX SmartPORT Module provides easy access to connect smart switch stations, motion detectors, and daylight sensors into a NX network system.

NX Cables (NXCBL) are designed to function with the NX Fixture Modules and associated Smart Sensors, Switch Stations and Radio Modules

The NX Wall Partition Sensor (NXWPS) automatically indicates when a moveable partition has been opened or closed. This allows adjacent rooms to be combined or separated into individual rooms.

Ceiling and Wall Mount Occupancy Sensor Accessories

RJ45 Adapter is designed to be used with Current Lighting low voltage occupancy and daylight sensors.

Specialty buttons provide an easy, customized solution to meet commercial design requirements. The offering includes a list of our most popular text buttons and options to customize text.